An ISO 9001:2008 Certified Company

Duns MonogramYoutubeFacebook
Send Email

Sahil Graphics

Banner
Home » Laminated Box Bag Making Machine

Laminated Box Bag Making Machine

Next generation box bag making machine

This machine is focused on the production of the laminated, coated and uncoated three-dimensional box bags with handle attachment.

Leader directly forms Non Woven Box Bag with loop handle automatically in one shot, no need to reverse to get finished box bag.

It is a fully automatic bag making machine, which can take place of 50 workers’ work. These bags are highly economical with very low production cost. It only needs two person, thus the labour force cost is largely saved.

Leader alone can serve with box bag making machine, bag making machine with handle and also laminated box bag making machine itself. It can produce over 50GSM non woven fabric and laminated fabric bags, such as food & beverage bags, wine bags, commodity bags, sweets bag, garment bags, shoes & hats bags, gift bags, etc.
Laminated Box Bag Making Machine
This non-woven bag producing machine with the best competitive advantage in the market. The bag manufactured through this machine can take weight up-to 20 kg.

Technical Specification :
Speed 30-50 PCS/MIN
Bag size and handle Bag gusset 8-20 cm
Bag length 23-50 cm
Bag height 18-45cm
Handle length 37-52 cm
Fabric requirement Handle thickness 60-120 gsm
Bag thickness 80-120 gsm
Total power and voltage requirement Air power 1.2m3/min, 1.0Mpa
Voltage 380V, 50Hz, 3Phase
Total power 28KW

Specification :

Rotogravure Printing Machine

High-speed computer Rotogravure Printing Machine (Winding And Unwinding Out)

The products in the domestic first seven motor using advanced PLC control system (seven vector motor control of the closed-loop tension control system, four paragraphs from the Japan Proton positions in the motor cylinder + ABB + Germany + Japan Yaskawa Siemens PLC) machine with excellent rigidity and job stability, compact structure, attractive appearance, suitable for a variety of web, printing gravure film.

Rotogravure Printing Machine
The main structure and features:
  • This machine is suitable for BOPP, PET, CPP, PVCD and the same nature film, paper, cellophane and aluminium foil. Its printing speed of 10-140 m / min, machine speed 150 m / min.
  • Main drive : The main transmission vector of Japan Yaskawa inverter vector control motor, drive each plate. Features: saving electricity.
  • Without shaft-mounted version of the agency : loaded version with the cylinder, pull the mandrel for loading, horizontal adjustment using screw movement. Features: reduce time to replace, to ensure concentricity, improve product quality.
  • Ink scraper : The blade can be adjusted up and down and at any angle, squeegee pressure single cylinder, lateral movement synchronous motor rotating cam. Features: extended version of the birthday noodles.
  • Imprint lifting mechanism : dual impression cylinder from the lock-bit step-up and slider, and down the cylinder on the cylinder leakage protection under the swap. Features: to ensure that the average pressure to ensure that color.
  • Chromatic robot : the use of computer-controlled synchronous motor drive by ball screw gear adjustment, automatic trapping. Features: rotating lubrication, chromatography and high precision.
  • Received, discharge institutions : the use of duplex, close, release the tension and material collection, discharge tension with variable frequency vector control traction speed. Features: Acceleration chromatic stability, horizontal direction, save for large quantities of printed materials, inks, solvents and energy, then the expected speed of 120 m / min, then the biggest waste of material is about 10 meters, more than three motor savings of 40 meters, inks, solvents and energy saving about 20%, greatly reducing the cost of the main products.
  • Drying and cooling structure : the use of centrifuges blowing smoke oven, electric oven tube located in each port of hair heating, oven heat within the formation of wind circulation, temperature control by the intelligent temperature controller, water cooled roll back to ensure that film cooling. Recycled air circulation. A cycle of every two-color equipment. Features: saving electricity.

Technical Specification :
Machine Model Type AZJ-8650A AZJ-8850A AZJ-81050A
Maximum width of base material Max. Width of Web 650mm 850mm 1050mm
Top speed of printing Maximum Max. Printing Speed 140m/min 140m/min 140m/min
diameter of coiling and uncoiling Inside Max. Diameter of Unwind/Rewind f600mm f600mm f600mm
diameter of base material coil Internal Diameter of Roll Core f76mm f76mm f76mm
Diameter of printing roller Diameter of Printing Cylinder f105-f380mm f105-f380mm f105-f380mm
Registration precision Accuracy of Registration ±0.1mm ±0.1mm ±0.1mm
Tension control scale Tension Control Range 3~25kg/Full Width 3~25kg/Full Width 3~25kg/Full Width
Oven heating power Heating Power of Oven 72kw 96kw 120kw
Total power of machine Total Power 109kw 136kw 160.5kw
Machine weight Weight of Machine 17000kg 19000kg 21000kg
Boundary dimension Overall Dimension L13500
x W3200
x H2500mm
L13500
x W3400
x H2500mm
L13500
x W3600
x H2500mm

Specification :

Laminating & Coating Machine

We are offering highly advanced Laminating & Coating Machine. We use a number of lamination and coating technologies that allow us to create packaging materials with diverse consumer qualities, based on appropriate combinations of raw materials.

Laminating & Coating Machine
Technical Specification :
Machine Model Model ONL-M1100 ONL-M1300 ONL-M1600 ONL-M1800
Die lip length Extrusion die width 1200mm 1400mm 1800mm 2000mm
Product width Coating width 500-1000mm 600-1250mm 800-1500mm 900-1700mm
Highest composite speed Max. Coating speed 10-150m/min 10-150m/min 10-150m/min 10-150m/min
Film spraying thickness Coating thickness 0.01-0.03mm 0.01-0.03mm 0.01-0.03mm 0.01-0.03mm
Screw draw ratio L/d ratio for screw 32:01:00 32:01:00 32:01:00 32:01:00
Maximum diameter ratio of reeling and unreeling Rewinding roll diameter 1200mm 1200mm 1200mm 1200mm
Appearance dimension Overall size 12500×7000×3200mm 1300×8000×3200mm 12000×9000×3200mm 13000×12000×3200mm
Install power Total power 70kw 80kw 100kw 130kw
Composite/mirror cold rod Mirror cool roll diameter 510mm 510mm 510mm
Applicable base material Adopt material Non woven \ BOPP \ Aluminum foil


Product Range
Fully Automatic Non-Woven Bag Making Machine Non Woven Bag Printing Machine Mini Offset Printing Machines Poly Offset Printing Machines
Sheetfed Offset Printing Machines Web Offset Printing Machines Prepress / Postpress Equipment Laminated Box Bag Making Machine
Flexo Printing Machine Plastic & Non Woven Cap Making Machine Non Woven Fabric Making Machine Non Woven Bag Machine Spare Parts
Non Woven Face Mask Making Machine Other Machines
Home    |    About Us    |    Products    |    Quality Policy    |    Global Network    |    Media Gallery    |    News and Events    |    Contact Us    |    Enquiry
Member IndiaMART.com© Sahil Graphics. All Rights Reserved (Terms of Use)
Developed and Managed by IndiaMART InterMESH Limited

Looking for Product Name ?

x

Send SMS Enquiry

*Please Enter Requirment

*Please Enter valid Mobile Number

*Please Enter Proper Name